Sharp TV Universal Remote Codes Programming (Guide)
The Sharp universal remote operates as a code, similar to most universal remotes on the market. The Sharp-compatible universal remote does not require programming to communicate to Sharp Aquos televisions or other Sharp devices.
The Sharp universal remote can also control other devices, eliminating the need for a separate remote. Before deploying universal codes to a Sharp television, following the programming procedures outlined below is necessary. Use the crisp TV codes if possible.
SHARP TELEVISION CODES FOR UNIVERSAL REMOTE
Check the table below for Sharp TV remote configuration codes for the Universal Remote based on the model of the device. Here you can discover the appropriate two, three, or four-digit codes for programming your Sharp TV universal remote.
GE UNIVERSAL REMOTE CODES FOR SHARP TV
0004
0122
0079
0095
0020
0009
0266
0123
0226
0063
0006
—
SHARP TV CODES FOR XFINITY
11801
10078
12049
11407
11089
10165
10032
10491
12285
10854
12286
11670
10093
10153
10178
11602
12434
10036
11756
13867
10706
12360
10386
10851
12183
12284
10885
COMCAST 5 DIGIT REMOTE CODES FOR SHARP TV
10165
10093
SHARP TV CODE FOR ONE FOR ALL REMOTE
0266
0122
0004
0020
0226
0006
0095
0009
0079
0063
SPECTRUM REMOTE CONTROL CODES FOR SHARP TV
10851
11602
10093
12360
10688
11756
10818
—
SHARP TV CODES FOR XFINITY REMOTE
10165
10093
RCA UNIVERSAL REMOTE CONTROL CODES FOR SHARP TV
1173
1122
1265
1196
1372
1357
1423
1171
1437
1261
1006
1004
1095
1111
1447
1029
1012
1026
1443
1112
1113
WHAT IS THE 5-DIGIT CODE FOR SHARP TV
10171
11963
11641
11326
11892
11517
10748
11660
10463
10171
11463
11204
11314
12002
11785
11326
11963
11204
11710
11780
10178
11517
11641
12183
11780
12002
10019
11564
10748
11314
11660
12049
RCA UNIVERSAL REMOTE CODES FOR SHARP TV
1095
1029
1423
1004
1372
1026
1122
1173
1171
1265
1261
1196
1112
1113
1357
1006
1447
1437
1012
1443
DIRECTV REMOTE CODE FOR SHARP ROKU TV
11756
10818
4-DIGIT CODE FOR SHARP TV
1064
1097
1078
1362
1099
1312
1378
0039
0386
1009
1004
0165
0093
1011
1153
1077
1375
1025
1311
1298
1274
1081
DISH NETWORK SHARP TV CODES
0178
0688
4618
4507
2049
2183
3183
4740
4398
1756
2360
0885
2434
0689
0093
0706
3519
3394
0818
4121
4892
0851
0491
1602
DISH REMOTE CONTROL CODES FOR SHARP TV
3519
0851
2360
4121
4398
0706
0885
0689
0093
4507
1602
4618
0178
2434
2049
3183
2183
0818
0688
4892
3394
1756
0491
4740
PHILIPS UNIVERSAL REMOTE CODES FOR SHARP TV
0224
0002
0913
0907
0813
0509
0202
0603
0111
0228
MAGNAVOX UNIVERSAL REMOTE CODES FOR SHARP TV
0058
0040
0034
0028
SHARP TV CODES FOR SPECTRUM REMOTE
11602
10818
12360
10093
10688
11756
DIRECT TV REMOTE CODE FOR SHARP TV
10818
10689
10688
10093
10851
ONN UNIVERSAL REMOTE CODES FOR SHARP TV
5074
5028
5010
5065
5045
SHARP TV CODES FOR DIRECTV REMOTE
10688
10818
10689
10093
10851
—
3 DIGIT SHARP TV REMOTE SETUP CODES
502
918
014
002
013
509
111
5 DIGIT SHARP TV PROGRAMMING CODES
10463
11641
12183
11314
10171
11314
10019
10178
11564
11641
11892
11517
11463
10171
11326
To begin programming your devices with a single remote, ensure that the devices and the remote’s batteries are operational. This will eliminate complications during remote setup.
Sharp TV Remote Codes
HOW TO PROGRAM A SINGLE UNIVERSAL REMOTE WITHOUT CODING?
With the auto-search technique, all one for all universal codes is scanned within the remote. Then, it analyzes a single code to identify the correct remote code that will function with your remote to configure the remote control. Follow the below steps:
Turn on the smart device, such as a television, that you wish to use as a universal remote.
To “power on” the remote, hold the device button (TV DVD, CBL, OK/SEL) for three seconds. The LED indicator will illuminate when the device is ready for programming.
Point the remote at the device and press the “CH+” and “CH+” buttons. The remote displays off-and-on signals. Press the “up” or “down” button repeatedly to switch off the device.
To verify the code, select the “power” key. The device will be activated. Change the Channel to confirm that the remote has been programmed adequately if the television turns on.
The code is saved by tapping the “device” icon. The device’s LED will flash twice to validate the saved code.
HOW TO MANUALLY CONFIGURE A UNIVERSAL REMOTE CONTROLLING MULTIPLE DEVICES?
Using the keycode, it is simple to construct a universal remote, and the keycode will identify the device’s manufacturer and model.
Initially, you must “Turn on the device.”
Select “TV” on the “One For All” ubiquitous remote control.
Then, click and hold the “Setup” button on the universal remote until it displays “Light Flash” (This indicates that the remote is in “Learning mode”).
Enter the “Keycode” you extracted from the table above.
After the procedure, “point the remote at the television” and “press the Power” button.
The “Power Button” can be released when the screen is off.
Using this universal remote, your television will now function flawlessly. If your device is malfunctioning, repeat the same procedure using a different code from the same section of the referenced table.
HOW TO PROGRAM UNIVERSAL REMOTE CONTROLS USING CODE SEARCH?
If you cannot find the code that works on the device, you can place your universal remote in search mode to find the correct one. This is a manual code that activates the remote’s search mode.
First, “Power On The Device.”
Then select and maintain the “Setup” button.
You must input the three-digit “9-9-1” code.
Then, press and hold the power button on the remote control. Then, select Channel up until the television “turns off.”
The preceding procedure may be time-consuming, but it is essential to identify your code. After completing the steps above, your remote should function properly.
DISABLE THE SHARP UNIVERSAL REMOTE CODES
If you are considering a new entertainment configuration and wish to disable the codes from one of your devices controlled by “sharp tv remote codes,” follow these simple steps:
Remove the batteries from the compartment on the rear of the remote control. Two or four AAA batteries propel most universal remotes for sharp televisions.
Vacant the battery compartment for approximately two minutes. While the batteries are being replaced, the “sharp tv remote” capacitor reserves power and maintains the memory. A minimum of two minutes will cause the stored energy to deplete.
By holding the facility button, you can force the remote to release all the facilities in the capacitor.
Continue pressing the facility icon to ensure no approaching signal fire. Once the capacitor is depleted, all stored codes for device operation will be erased.
Substitute new batteries.
Repeat the Sharp remote protocols for each desired device controlled by the Sharp universal remote.
The “universal remote for sharp television” is user-friendly and potent enough to control all the room’s entertainment devices. You can enjoy and conveniently control your device when universal remote codes are correctly programmed.
CONCLUSION
This guide should have helped you locate the Sharp TV universal remote codes and programming guide. With these credentials, you can easily control your TV and access all its features and functions. If you have any questions or concerns, please let us know in the section below, and we will gladly assist you.
FREQUENTLY ASKED QUESTIONS
How do I discover the code for my TV remote?
The simplest method for locating a TV remote code is to consult the product documentation. Refrain from losing the paper manually. You can locate the model and serial number on the back of your television.
Are Sharp remote controls universal?
One For All’s extensive selection of replacement remotes includes Sharp TV remotes compatible with all Sharp (IR) TV models. Therefore, whether you own a Sharp LCD, LED, or Plasma television, our replacement remotes are compatible with all of them!
How do I reconfigure the remote for my Sharp LCD TV?
If the remote control still does not function, remove the batteries to recalibrate it. Then, for 30 seconds, tap and hold the POWER BUTTON. Next, insert new batteries and press the TV and POWER buttons to activate the television.
How can a TV remote be programmed without a code?
To program your universal remote without a code, you must: Hold down the SET and Zero (0) controls simultaneously four times on your universal remote. This is a crucial stage where the majority of people fail. The LED light indicator (typically red) will then illuminate steadily.
from Sycamore Net https://sycamorenet.com/tv/sharp-tv-universal-remote-codes/
No comments:
Post a Comment