How To Program Dish Remote Codes For Samsung TV? (Guide)

To use a Dish remote with a Samsung television for the first time, you must program or integrate the remote with the television. You can configure the same remote to operate other devices like your DVD player.

There is no need to transition between remotes when using the remote. You will need the Samsung TV Dish Remote Codes to complete the process.

This article contains the protocols and a step-by-step guide for completing the programming procedure. You should be able to program your Dish remote control to your Samsung television by the end of this post.

DISH REMOTE CODE PROGRAMMING FOR SAMSUNG TV

How To Program your DISH Remote to your TV?

How, however, is the question. Codes. That’s how it’s done. These are codes that are specifically designed for a specific brand and device that you have at home. These codes perform all necessary programming, resulting in a centralized command across all entertainment devices and equipment on your end.

When all of the processes are perfected, you will be left with a relaxed self, sitting gracefully savoring the joy of entertainment. However, if you want a more detailed representation of the entire programming process, check out the tutorial below, which will also serve as a future reference:

1. Before you begin, double-check all of your devices, including your remote. Check that everything is in good working order to avoid any problems later.
2. Using your remote, press the device button and select the device type that corresponds to the one you are attempting to program with the remote.
3. Hold down the SETUP button until a light blinks. This indicates that your device is in Learning Mode.
4. Now that it’s in Learning Mode, enter the code and double-check that it’s in the correct order to avoid an error.
5. Turn off the television.
6. If the TV did not turn off, the process was unsuccessful because the remote did not respond to the command. Retrace your steps from the beginning and try another code.
7. Simply repeat the process if you have another Samsung TV to pair with the remote.

Although this sounds simple, you may become frustrated throughout the process because you may have to repeat some steps and processes to perfect it all, which is why you must sharpen your visual and tactile senses and remain focused and patient. These are critical components for avoiding any consequences.

SAMSUNG TV CODES WITH SAMSUNG IR CODES

• 3601
• 0161
• 0261
• 0051
• 1181
• 3211
• 3711
• 2141
• 2551
• 0301
• 1561
• 2401
• 1661
• 3771
• 3661
• 3711
• 3821
• 4111
• 4841
• 5191
• 3921
• 3881
• 3741
• 4101
• 5201
• 3211
• 3921
• 3911
• 3811
• 3861
• 3831
• 3811

DISH REMOTE CODES (20.0 – 21.0)

• 505, 555, 516, 523, 653, 377, 761, 671, 749, 720, 702, 622, 860, 623, 618, 183, 004, 755, 377, 546, 604, 500, 681, 341, 069, 265, 707, 140, 127, 806, 661, 001, 858, 000, 124, 123, 520, 635, 069, 308, 937, 374, 264, 284, 294,655, 718, 898, 111, 341, 734, 113, 182, 384, 784, 376, 202, 405, 583.

DISH REMOTE CODES (20.0 – 21.0)

• 505, 794, 860, 123, 856, 833, 655, 566, 717, 989, 653, 222, 622, 183, 585, 586, 473, 283, 348, 394, 710, 738, 604, 516, 511, 611, 123, 564, 843, 681, 473, 827, 004, 008, 005, 959, 400, 777, 001, 509, 505, 934, 374, 284, 560, 938, 384, 374, 209, 837, 949, 376, 385, 068, 576, 930, 684, 698, 586, 583.

DISH REMOTE CODES (3.4 – 4.4)

• 506, 833, 526, 573, 720, 500, 730, 655, 833, 854, 853, 704, 656, 783, 888, 603, 601, 704, 687, 783, 483, 574, 783, 792, 754, 732, 721, 739, 738, 392.

DISH REMOTE CODES (40.0, 50,0, 52.0, 54.0)

• 3993, 0702, 0178, 2051, 0178, 1673, 1632, 1060, 1903, 1575, 1573, 3970, 0030, 2837, 2938, 8372, 2038, 2037, 2847, 4832, 3847, 3847, 2837, 2937.

DISH REMOTE CODES (5.4 – 6.4)

• 659, 667, 695, 523, 647, 738, 679, 669, 573, 652, 654, 655, 656, 658, 730, 734, 705, 704, 665, 670, 678, 746, 679, 574, 374, 897, 394, 837, 573, 573.

DISH REMOTE CODES (6.2)

• 667, 506, 680, 523, 669, 573, 627, 652, 654, 653, 704, 717, 755, 670, 526, 617, 647, 655, 653, 749, 763, 848, 374, 374, 374, 485, 732, 457, 374, 382.

DISH REMOTE CODES (PREMIUM –PREMIUM PLUS)

• 738, 588, 695, 532, 712, 721, 516, 612, 532, 712, 612, 704, 652, 653, 655, 656, 665, 505, 506, 667, 679, 680, 730, 717, 669, 677, 658, 730, 688, 680, 573, 706, 705, 654, 656, 717, 660, 680, 566, 589, 483, 382, 384, 386, 485.

HOW TO PROGRAM THE DISH REMOTE TO SAMSUNG TV (20.0, 20.1, 21.0, 21.1 MODELS)?

These are the older Dish models. The guide below will show you how to program any of these remotes to your Samsung TV.

• Using your remote control, turn on the TV you want to sync.
• Make sure your Dish Remote is pointing at your TV. Remove any items that are obstructing the TV. This is to ensure that your remote works properly.
• For a few seconds, press and hold the ‘TV’ button on your remote. After the tiny LED light on the ‘Mode’ button goes out, release the button.
• Using the number buttons on your phone, enter any of the remote codes listed above. After entering the codes, press the # button.
• The ‘TV’ button will blink a few times before indicating whether or not the code was accepted. If the code is not accepted, enter the next code. Please keep in mind that you may have to try several codes before you find the right one. Don’t worry, you only need to go through this process once.
• Press the ‘Power’ button after entering the correct code. If your TV turns off, you’ve finished the syncing process. If not, repeat the process beginning with Step 3.

HOW TO SET UP A DISH REMOTE FOR A SAMSUNG TV (40.0, 50.0, 52.0, 54.0 MODELS)?

These are the new Dish Remote Control models. The guide below will show you how to program any of these remotes to your Samsung TV.

• On your remote, press the ‘MENU’ button. Locate the ‘Receiver’ option and press the ‘UP’ button. If you’re using the 40.0 remote, press the ‘MENU’ button several times. To access the menu on the 50.0 remote model, press the ‘HOME’ button several times.
• Select ‘Remote Control’ from the menu by pressing the ‘Settings’ button.
• Scroll down to ‘Device List’ and select ‘TV’.
• Select ‘TV Pairing Wizard’ and then ‘Device Brand’ to locate your TV brand.
• Select ‘Next’ after clicking on your TV brand. For your remote mode, enter any of the remote codes listed above.
• The ‘TV’ button will blink a few times before indicating whether or not the code was accepted. If the code is not accepted, enter the next code. Please keep in mind that you may have to try several codes before you find the right one. Don’t worry, you only need to go through this process once.
• Once you have entered the correct code, press the ‘Power’ button. If your TV turns off, you’ve finished the syncing process. If not, repeat the process beginning with Step 3.

FREQUENTLY ASKED QUESTIONS

What is the remote code for a Samsung TV?

These handy devices allow you to control your Samsung television as well as all of your external devices with a single remote. To use this feature, you must first use a code to pair the universal remote with your television. 0101 is the first code to try. Don’t worry if that code doesn’t work!

What is DISH’s four-digit code?

Your security code is a four-digit number that you entered when you first set up your DISH account. We request it whenever you call us to protect your privacy and security.

What should I do to get my Samsung TV to recognize my remote?

To display the pairing pop-up window, press the Return and Play/Pause buttons simultaneously for more than 3 seconds. Remove anything that is in the way of your TV and your remote.

How do I program a universal remote control to my Samsung television?

Pairing your Samsung universal remote to your TV is a breeze. Simply press and hold the Back and Play/Pause buttons at the same time. The TV will display a message informing you that the remote has been paired. You can now control it just like any other remote.

from Sycamore Net https://sycamorenet.com/tv/dish-remote-codes-for-samsung-tv/